| |
| |||
HORNET K02 ||| |
 |
|
| |||
HORNET K03 ||| |
 |
|
Aero for NSX to which many aero
parts appeared in and various face design was born.
Now, the bumper for NSX [HORNET K-02] and [HORNET K-03]
are newly born.
Many option parts are prepared. 70 or more kinds of choices
can be performed.
Please choose "your specification."
GT'02NSX is made into a base vehicle, and the design of
each part is arranged so that the cooling performance
of NSX may not be spoiled.
The duct of both the sides of a bumper cools intensely
the front brake caliper heated in the hard brake in a
circuit drive.
This is the feature of the ROUTE KS items which are using
the circuit drive as the target.
Please
feel the performance by your NSX with the forcibleness
which is not once. |
|
| |
| Front |
\98,000 |
Rear |
\138,000 |
|
The wide fender kit dealing with a normal bumper appears also
in HORNET series!
if it equips with this fender -- front 3cm and rear 4cm -- it
becomes wide. |
 |
 |
|
| Front bumper = |
\168,000(CFRP） |
* Attach the brake duct as standard.
* The blinker lens is also set. Please specify a
color.
* A blinker lens cover also has sale of a single
article.
*This bumper serves as a basic form. Please choose
as the following option. |
|
|
Duct option |
 |
| Option Brake ductless |
\5,000up |
When a duct is not needed |
 |
It is the duct of the GT style which exists in the center. |
 |
It is a central large duct. |
|
|
| Front bumper = |
\178,000(CFRP） |
* This bumper serves as a basic
form of K-03.
* The brake duct (round shape on either side) is
attached as standard.
* Please choose options from the following.
□ |
|
| Duct option |
 |
| Option Brake ductless |
\5,000up |
When a duct is not needed |
 |
It is the duct of the GT style which exists in the center. |
 |
It is a central large duct. |
|
| Canard
option |
| L type canard (CFRP) |
\29,800 |
It is the most popular item. These goods are indispensable
items when attaching the following canard option. |
| Curve canard (CFRP) |
\22,800 |
|
| Fuji canard type 1
|
\21,800 |
|
| Fuji canard type 2 |
\24,800 |
|
 |
This canard can increase
and control a front down force further.
"The curve canard type2" produced
looks and the further strength.
It is only for the bumpers for NSX [HORNET].
These parts are attachment with an exclusive
stay and a bolt. |
|
| Curve canard type2（CFRP）:\25,800 |
|
|
|
 |
Fuji canard
Type3 appearance!!
The feature of this part is the line which
rises from the front to rear.
These parts are recommendation at the owner
who pursues the stability of driving further.
These parts can be attached in the bumper
of ZERO FORCE, and a HORNET series L type
canard. |
|
| Fuji canard type 3:\24,800 |
|
|
|
|
| |
|||  |||
|
|
 |
| BONNET STEALTH |
| |
CFRP |
FRP |
| new
style lights |
\198,000 |
\168,000 |
| retractable
light |
\178,000 |
\148,000 |
|
|
|
 |
| |
 |
| |
|
|
 |
| ＨＩ
Type |
|
 |
| LOW
Type |
|
| Fin |
\58,000(CFRP）
\48,000(FRP） |
|
|
This bonnet is
the item of the attention which revolutionizes a
front face.
These goods are the designs which raise cooling
efficiency at the time of a circuit run. Please
try the effect for yourself. |
|
|
|
|
|
 |
| Exclusive Gurnee
flap \18,000 |
HI type 11mm / LOW type 6mm
Please choose out of two kinds.
It becomes only a product made from CFRP. |
|
| REAR-WING
TOMCAT |
| |
CFRP |
FRP |
| 1800mm |
\198,000 |
\168,000 |
| 1700mm |
\178,000 |
\148,000 |
| 1600mm |
\168,000 |
\138,000 |
|
|
The Wing Tom
Cat is designed in peculiar banana form. If these
goods are attached in your NSX, appearance, forcibleness,
and presence will improve.
It is not so then. This WING also raises a down
force. The performance of these goods is the result
which is satisfying even if it takes anything.
Of course, Gurnee flap is prepared as option parts.
Gurnee has HI type (11mm) and a LOW type (6mm).
This WING can perform a precise setup at the time
of a circuit driving.
A bracket and stay are attached to these parts.
Marga-hills trunk spoiler is independently required
for attachment of these parts. (Under development) |
|
|
| |
| |
|
 |
| Exclusive back
fog cover |
\15,000 |
| Two exclusive
fins (CFRP) |
\38,000 |
|
|
| Rear diffuser |
| |
CFRP |
FRP |
| Type-1 |
\158,000 |
\128,000 |
| Type-2 |
\98,000 |
\78,000 |
|
|
The feeling which
sticks to the ground by attaching Rear Diffuser
can be felt. Rear Diffuser is positively adopted
as GT machine or F1 machine.
This part is the design of the NSX no one but of
a Midship layout. And the body of RearEngine is
followed up in any scenes.
Rear Diffuser is the design by exclusive stay so
that regulation of some height can be performed.
This part can adjust the height of a main part according
to the form of a muffler.
A back fog lamp and two center fins are option parts.
|
|
|
| |
| |
|
 |
| The exclusive
cover (CFRP) |
\38,000 |
| The exclusive
cover (FRP) |
\25,000 |
|
|
| SIDE
STEP PHANTOM |
| \108,000(FRP) |
|
|
We surely recommend
attachment of a side step to the direction of thought
that the body of NSX of a basic setup is high. The
height of the body of NSX is shown still lower.
Of course, the functionality of these parts is also
thought as important. This original side step corresponds
also to the wide body.
This side step is an item indispensable to step-up
of your NSX.
Option parts have a cover only for side steps.
The quality of the
material is only FRP. |
|
|
| |
|
|||  |||
|
|
 |
| LIGHTCOVER DEVIL
EYE |
| |
CFRP |
FRP |
| Light cover |
\28,800 |
\25,800 |
These goods are the parts only for retractable
light.
Attachment of these goods is only stretched
on an attached exclusive tape. |
|
|
|
| ||| Single article blinker lens cover |||
|
| BLINKER
LENS COVER |
| color |
Clear or Smoke |
Blue or red |
| Lens cover |
\18,000 |
\20,000 |
The single article also sells the blinker lens cover of
K-02 standard.
The color of a lens can be chosen from four kinds. (smoke,
clear, red, blue)
These goods can be attached also in a standard bumper
and the bumper of the other company. |
|
|
|||
|||
|||
