| The
products of our company can be shipped in the whole world. Please request
an estimate and an order from mail
form. |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
| - |
|
|
| - |
|
| |||
The muffler for a circuit drive (Titanium) ||| |
 |
| NA2（3.0L） |
\198,000 |
| NA2（3.2L） |
\218,000 |
|
|
ONE・SPEC
The type only for NA1 (3.0L) is on sale!
TWO・SPEC
The type only for NA2 (3.2L) is on sale!
This muffler has adopted the few welding technology of
degradation.
The muffler of high rotation use is due to be made.
These goods developed the standard-sized car as a premise.
It became this form as a result of testing repeatedly. |
  |
|
| |||
The muffler for a circuit drive (Stainless)||| |
 |
| NA1(3.0L) |
\118,000 |
| NA2（3.2L） |
\138,000 |
|
|
ONE・SPEC
The type only for NA1 (3.0L) is on sale!
TWO・SPEC
The type only for NA2 (3.2L) is on sale!
This muffler has adopted the few welding technology of
degradation.
The muffler of high rotation use is due to be made.
These goods developed the standard-sized car as a premise.
It became this form as a result of testing repeatedly. |
|
|
| |||
Automobile inspection correspondence muffler (LEV engine correspondence
) ||| |
 |
| NA1(3.0L) |
− |
| NA2（3.2L） |
\218,000 |
|
|
In our company,
the exclusive muffler of NA1 (3.0L) type and NA2 (3.2L)
type is under development.
These parts are not as a race car and it develops as a
muffler of a standard-sized car.
The few welding technology of degradation is used for
a welding portion.
The muffler which thought using it by high rotation as
important is due to be made. |
|
|
| |||
Automobile inspection correspondence muffler (Titanium)||| |
|
| NA1(3.0L) |
\198,000(税込) |
| NA2（3.2L） |
\218,000(税込) |
|
|
In our company,
the exclusive muffler of NA1 (3.0L) type and NA2 (3.2L)
type is under development.
These parts are not as a race car and it develops as a
muffler of a standard-sized car.
The few welding technology of degradation is used for
a welding portion.
The muffler which thought using it by high rotation as
important is due to be made. |
|
|
| |||
Automobile inspection correspondence muffler (Stainless)||| |
 |
| NA1(3.0L) |
\118,000 |
| NA2（3.2L） |
\138,000 |
|
|
In our company,
the exclusive muffler of NA1 (3.0L) type and NA2 (3.2L)
type is under development.
These parts are not as a race car and it develops as a
muffler of a standard-sized car.
The few welding technology of degradation is used for
a welding portion.
The muffler which thought using it by high rotation as
important is due to be made. |
|
|
| |||
GT duct Type2 ||| |
 |
 |
 |
 |
| GT
ducttype2 |
| GT
ductType2 |
\98,000 |
| Funnel only for
Type2 |
\35,000 |
[The contents of a set]
The main part of Type1 duct, 4mm acrylics hatch,
back carbon, exclusive funnel |
|
 |
|
|
|
| |||
Undershirt board (made from carbon)||| |
|
The
down force of a front comes to be acquired by attaching
this part in the bottom of a front bumper.
And it greatly contributes to improvement in handling
nature. |
|
| |||
Metenance-rid ||| |
|
By
making Metenance-rid into a mesh, it can feel refreshed.
A hole portion can choose a mesh type and acrylics specification,
and can choose CFRP or FRP further. |
|
| |||
GT wing [Super Eagle] ||| |
|
These parts are
trunk spoiler only for NSX GT wings.
It is under development by the GT'03-NSX type.
[Details]
This part is trunk spoiler of the center stay type which
can be used by "EAGLE" and "TOMCAT."
The form of Wing is due to make an old basis the different
form.
Internal structure differs from "EAGLE" and
"TOMCAT" of the conventional product. GT wing
of the conventional product cannot do attachment with
center-stay-parts. |
|
| |||
GT wing: Center stay only for super eagles ||| |
|
This product is
center stay only for NSX NEW GT wings.
* This part is needed in
the case of attachment of a super eagle etc. |
|
| |||
Reservoir tank only for NSX ||| |
 |
| Reservoir
tank made from aluminum |
\36,000 |
|
|
About
the option level gauge (window) or (hose), it is an important
point inquiry.
[Quality of the material]
Aluminum made from welding (5057 material) = The quality
of the material which has intensity
[Thickness]2mm
[Durable pressure examination]
It is OK to 5kg with water of 100 degrees.
[Others]
It is press molding by 1 welding. Intensity is up.
We recommend these parts to the direction which has dissatisfaction
in the reservoir tank made from the plastic of NSX.
For a cooling system part, if these goods have a trouble,
they will lead to an engine blow.
A pressurization examination is repeatedly carried out
to development and it is manufacturing by the remarkable
exaggerated quality.
Please ask the details about attachment. |
|
| |||
フロントストラットタワーバー（チタン製） ||| |
|
フロントの剛性をお約束。
またハンドリング性能の向上を容易に体感できます。
Titanium is used for the main part of a bar.
It is with an aluminum bracket. |
|
| |||
フロントストラットタワーバー（アルミ製） ||| |
|
フロントストラットタワーバーを取り付けることにより、大幅な剛性アップに貢献するとともに、ハンドリング性能の向上を容易に体感できます。
アルミブラケット付！ |
|
| |||
リヤストラットタワーバー（チタン製） ||| |
|
純正パーツを取外しこのリアストラットタワーバーを取り付けることにより、一層の剛性アップが望めます。
バー本体はNSXオーナーにふさわしい材質チタンを使用。
アルミブラケット付！ |
|
| |||
リヤタワーバー（アルミ製） ||| |
|
純正パーツを取外しこのリアストラットタワーバーを取り付けることにより、一層の剛性アップが望めます。
バー本体はアルミを使用。
アルミブラケット付！ |
|
| |||
ソリッドバー（アイボルト有・無） ||| |
 |
| アイボルト付 |
\59,800(税込) |
| アイボルト無 |
\57,800(税込) |
|
|
ふんだんにﾁﾀﾝを使い、高級感あふれる素質を実現。
室内に取り付けることにより剛性を高めるとともに、4点式ハーネスの取付が容易にできるようになります。
※バー部分は全てチタン製 |
|
| |||
アルミ製ソリッドバー（アイボルト有・無） ||| |
 |
| アイボルト付 |
\23,800(税込) |
| アイボルト無 |
\??,?00(税込) |
|
|
ふんだんにアルミを使い、高級感あふれる素質を実現。
室内に取り付けることにより剛性を高めるとともに、4点式ハーネスの取付が容易にできるようになります。
※バー部分は全てアルミ製 |
|
| |||
New style light fixed stay ||| |
 |
| New style
light fixed stay |
\15,800(Right
and left) |
|
|
|
| |||
新型ライト用交換配線 ||| |
 |
|
※取付用ボルト付属です。
|
|
| リトラクタブルライトから現行型固定式ヘッドライトへ交換する際にはライトのコネクタが変わっている為、配線を変換する必要があります。この配線Kitがあれば少しの加工でカプラーオンでライトの配線をすることができるようになります。 |
|
| |||
クリアウインカーレンズ ||| |
 |
|
※取付用ボルト付属です。
|
|
| ノーマルウインカーを取外し、そのまま取付ができます。サイドマーカーをクリアにすることで見た目も向上します。車検もそのままでOKです。 |
|
| |||
ウインカーレンズカバー ||| |
 |
| スモーク・クリア |
\18,000(税込) |
| ブルー・レッド |
\20,000(税込) |
|
|
リトラクタブルヘッドライト用のフロントウインカーレンズのカバーです。
空力の向上、見た目にも引き締まった表情となります。 |
|
| |||
Bonnet stand ||| |
|
Bolts are accessories.
|
When
equipped with the external bonnet, you have to remove
a bonnet stand more often.
Many users have to prepare a stand personally or have
to request work.
Our company prepared the bonnet stand for such a user.
These parts make a hole in a body in the case of attachment
and are not required.
（However, in order to attach these parts, it is necessary
to make a screw hole in a bonnet side.） |
|
| |||
License Plate Holder (General-purpose type) ||| |
 |
| License
Plate Holder |
\5,800 |
Bolts are accessories.
|
|
These
goods are using the structure on which a license plate
falls down by power of a wind. These goods can be driven
without removing a license plate at the time of a circuit
drive.。You can use it, in case a license plate is transferred
by the external bumper.
Since this product is a general-purpose type, you can
use it also for cars other than NSX. |
|
| |||
Bonnet penetration hook ||| |
 |
 |
The
lead hook which is not until now is developed.
Of course, accuracy is also actual proof ending.
The strat tower bar of our company
can attach simultaneously. |
|
| Bonnet
penetration hook(The product
made from aluminum) |
\32,000 |
|
|
|
|
| |||
インマニプレート ||| |
|
アルミプレートにドライカーボンを取り付けたインマニプレートです。
アルミプレート部分はアルマイト処理でお好みのカラーにすることができます。 |
|
| |||
チタンシフトノブ Type-R ||| |
 |
| ﾁﾀﾝｼﾌﾄﾉﾌﾞType−R |
\??,?00(税込) |
|
|
| 現行Type-Rのシフトノブを忠実に再現しました。操作性も向上し、見た目にも良い一品となっています。 |
|
| |||
チタンシフトノブ Type-S||| |
 |
| ﾁﾀﾝｼﾌﾄﾉﾌﾞType-S |
\11,800(税込) |
|
|
| ※現行Type-Sのシフトノブを忠実に再現しました。操作性も向上し、見た目にも良い一品となっています。 |
|
ROUTE KS original
||| A special car high-pitch
ready opportunity A special car high-pitch ready opportunity ||| |
 |
Only store sale.
Please ask a price.
(The
product made from QUANTUM)
|
|
|
They are
CR special goods which can be purchased only in
our company.
(The mail order has not been carried out)
An arrangement charge is also included in the selling
price. |
|
|
|
|
